Cooper Security 9751 Guia do Utilizador descarregar pdf (Página 41)

2. Programming Commands

497096, issue 3 Page 35

77: Level/Partition D Alarm Response

This command sets the Alarm Response for Level or Partition D.

In a single system, the options are:

Option

0 Keypad sounders only.

1 Internal sounders and keypad sounders (default).

2 Local alarm (internal and external sounder only).

3 Full alarm (communication and internal/external sounders).

In a partitioned system, the options are:

Option

0 Keypad sounders only.

1 Local alarm (internal and external sounder only).

2 Full alarm (communication and internal/external sounders) (default).

Note: Compliance with PD 6662 / prEN 50131-1: 2004 (see page 85) requires that

Command 77 is set to option 2 in a partitioned system.

78: Not used

Level D Entry Time has been replaced by Command 201–204.

79: Level/Partition D Exit Time

This command sets the Exit Time for Level or Partition D.

Option

1 10 seconds

2 20 seconds (default)

3 30 seconds

4 45 seconds

5 60 seconds

6 120 seconds

Note: In a single system, you cannot change the operation of Final Exit and Entry Route

zones assigned to Level D as you can with Levels B and C (see Commands 60, 61,

70 and 71). For this reason, Cooper Security recommends that you use Level D for

simple applications only.

80: Forbikobler Chime

This command links the bell push on the Forbikobler keypad to the Chime on

the system, so that pressing the bell operates the sounders.

Option

0 Off. Pressing the bell push does not operate the sounders (default).

1 On. Pressing the bell push operates the sounders.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 95 96

Sem comentários

Cooper Security 9751 Guia do Utilizador Página 41