Cooper Security 9752 Guia de Instalação descarregar pdf (Página 12)

11976870 Page 8

2. TECHNICAL DESCRIPTION

Control Unit Specification

General

Environmental Class 2

Security EN50131-1 or PD6662 Grade 2

Operating temperature -10° to +55°C

Humidity 96% RH

Dimensions 300mm W, 390mm H, 95mm D

Weight 5.0 kg

Internal Clock ±10 minutes over one year (depending on the

accuracy of the mains supply frequency).

Radio detector differs 16,777,214 (2

-2)

Suitable for use in a system that is designed to comply with EN50131-1,

ACPO-IAS Policy, NSI NACP14.

This equipment is compliant with EN 50136-2-1 and EN 50136-2-2. It allows

the alarm transmission system to meet the performance requirements of

prEN 50131-1: 2004 ATS 2 provided that:

a) It is installed in accordance with the installation instructions.

b) The connected PSTN is functioning normally.

c) The ARC is adequately equipped.

Power Supply

All currents accurate to ±5%.

Mains power supply 230VAC +10%/-15%, 200mA max, 50Hz ±5%

System power supply Type A. 13.8VDC, 1.0A

Battery charge current limit 250mA

To comply with the requirements of EN50131, the total current taken from the

power supply, not including the battery recharge current, but including

auxiliary outputs and other devices, must not exceed 750mA.

Nominal power requirements (DC):

9752 130mA quiescent, 220mA active

9941 20mA quiescent, 60mA backlight on

9943 30mA quiescent, 70mA backlight on

9954 20mA typical, 30mA maximum

RFX08/16 55mA

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Sem comentários

Cooper Security 9752 Guia de Instalação Página 12