Cooper Security i-onEX Manual do Utilizador descarregar pdf (Página 13)

FOB-2W-4B

Page 11

5. Changing the battery.

If you have had the fob for some time and the battery has run

low, then you will need a 3V CR2450 LiMn02 type battery as a

replacement.

When you have the replacement ready, change the battery as

follows:

1. Undo the screw on back of the fob (see figure 3)

Figure 3.

2. Lift off the battery lid.

3. Note which way up the battery is fitted and gently prise out the

old battery. CAUTION: Do not try to prise out the battery by

inserting a screwdriver near battery contacts.

4. Fit the new battery. Make sure you insert it with the positive

side upwards. Note: make sure your hands are clean and dry

when handling the new battery. Even small amounts of grease or

dirt can affect the contact between the battery and the fob.

5. Re-fit the battery lid.

6. Hold the key-ring shackle in place and re-fit the screw you

removed in step 1.

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

Cooper Security i-onEX Manual do Utilizador Página 13