Cooper Security M2000 Guia do Utilizador descarregar pdf (Página 6)

4

Option 1-1-2:

Performing a Walk Test

This option enables you to check that zones

are operating correctly. You can test only

those wards that you have access to.

Each zone tested is added (once) to the

event log, which you can review using User

option 2-9 (page 36).

Zones triggered on a walk test are not

communicated to the ARC, if used.

User 1 Menu 1

Test Menu

1. Press [ to select this option.

Test Menu 2

Walk Test

2. Use | or ¬, or press 2 to select Walk

Test, then press [.

Walk test wards:

Ward > 1*......

3. Use the number keys to select the wards,

then press [. Any ward shown will be

tested. (A “*” means that the ward will

not be tested. A “.” means that either

you have no access, or the ward is not

programmed.)

ESC To Stop Test

& View Zones

4. Walk through your wards and activate all

detection devices.

0003 Active

As you activate each zone, the internal

sounders will emit a chime tone and the

display will identify the activated zone.

5. When you have finished, press ].

Panel Zone 1

0001 Healthy

6. The status of the lowest zone number

tested is displayed. Press [ to view the

next lowest zone tested.

7. Press ] to exit.

1 2 3 4 5 6 7 8 9 10 11 ... 75 76

Comentários a estes Manuais

Sem comentários