Cooper Security M2000 Guia do Utilizador descarregar pdf (Página 50)

Engineer Menu 1-4 Engineering Manual

Example 1: The gates in custom output 1 have the following default settings. If the

defaults are used, the custom output activates only when the system is full set AND there

is an alarm.

OR GATES AND GATES

Always Off

System Full Set

Always Off

System Full Set

Always Off

Alarm

Always Off

Alarm

Example 2: The gates in custom output 2 have the following default settings. If the

defaults are used, the custom output activates only when the system is full set AND there

is a confirmed alarm.

OR GATES AND GATES

Always Off

System Full Set

Always Off

System Full Set

Always Off

Confirmed

Always Off

Confirmed

Example 3: The following example shows how to program a custom output to enable it to

activate when a monitored power supply reports a "PSU - Power" event AND a selected

ward is set.

OR GATES AND GATES

Always Off

PSU - Power

Always Off

Set (Ward option 08)

Always Off

Set (Ward option 08)

Always Off

Set (Ward option 08)

Step 2 – Select Output Number

Select the output of the chosen type to set up. For example, if you have chosen to set up a

Panel output, select whether to set up output 1, 2, 3, 4, or 5.

NOTE:

The programmable output available on the keypad PCB is electronically linked to the

lower LED on the display. The LED is active when the output is active. There is a jumper

link “LED mimic” on the keypad pcb that you can remove if you wish the lower LED to

stay dark.

By default the keypad output is programmed as “Pending”. This means that it becomes

active if there are two (or more) alerts pending.

When connected to an MSNode, the keypad output follows one of the two outputs on the

MSNode. To program the function of the keypad output you must program the function of

one or other of the MSNode outputs.

To select which output the keypads will follow:

Give the keypad an even address (2 or 4) to follow output 2.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 179 180

Comentários a estes Manuais

Sem comentários

Cooper Security M2000 Guia do Utilizador Página 50

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security M2000