Cooper Security 9651 Guia do Utilizador descarregar pdf (Página 10)

2. Everyday Operation

Page 6

General Procedure

To set the system:

Secure all doors and windows.

At the keypad, key in an access code

(or present a tag).

Note:If you enter an incorrect code, try again. If you enter an incorrect code four

times, all keypads will be locked for 90 seconds and a tamper alarm will start.

The display shows (for example):

System OK

Set?

Press the appropriate level key.

Note: If you press



without a level key, the system sets Level A (Full Set).

If you have omitted a zone (see page 13),

the display shows (for example):

Omit Zone 03?

Set?

Press  to continue with the zone omitted.

If you do not want to omit it, press  to exit.

During the exit procedure, the keypads give

a continuous exit tone. The tone may be

intermittent if the final door is open.

Setting A 009

If you hear an intermittent tone from the

keypads or internal sounder and the final

door is not open, a detector is being

triggered (see page 8).

Leave by the designated exit route.

When you complete the exit procedure in

accordance with the setting method in use,

the system sets and gives a double "beep".

The keypad display shows which level or

partition is set.

Set A

9651PD

Set A

9651PD

Note: If you decide not to set the system, key in your access code again (or

present a tag) to unset it.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Sem comentários

Cooper Security 9651 Guia do Utilizador Página 10