Cooper Security i-on16 Guia de Instalação descarregar pdf (Página 16)

i-on16

Page 16

2. Alarms

The table below shows the different kinds of alarms possible.

Type of

Alarm

Signal

(see note)

Started by:

Intruder

Loud warbling

tone from

siren.

Normal alarm or entry route zone

activated when system is set.

24 hour zone activated at any time.

Fire

Pulsing tone

from siren.

Fire zone activated at any time.

Hold Up

Loud warbling

tone from

siren

HUA zone or radio Hold Up Alarm

transmitter activated at any time.

Pressed on keypad.

(The installer must enable this

feature on your system.)

Technical

Quiet beeping

once per

second from

keypads.

Technical alarm zone activated at

any time.

Fault

Quiet beeping

once per

second from

keypads.

A system fault detected by the

control unit, for example, mains

failure, or communications line fault.

See page 20.

Silencing an Alarm

In an alarm the sirens run for a limited time set by the installer (a

maximum 15 minutes for intruder and Hold Up Alarms).

If you return to the system while the sirens are running you can

silence the siren as follows:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Comentários a estes Manuais

Sem comentários

Cooper Security i-on16 Guia de Instalação Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security i-on16