Cooper Security i-on16 Guia de Instalação descarregar pdf (Página 57)

i-on16 4. Administration

Page 57

8. Press each key once.

The bottom line of the display

shows the key you pressed.

Press both radio HUA keys

together to test.





As you press the function keys

on the keypad the display

shows their name, for

example:





9. Press  to end the test.





Walk test

The Walk Test menu allows you to test detectors without starting

an alarm.

To “walk test” an alarm system you operate each detector in the

system. If the detector is working the control unit sounds a

confirmation tone and flags that the detector has passed the test.

Simply walking past motion detectors should be enough to trigger

them, but you will have to open doors and windows if you want to

test any detectors attached to them.

Note that you cannot test Fire detectors and 24 hour zones

during a walk test. The control unit will always start an alarm if

you activate those detectors. (A 24-hour zone has detectors that

are “live” all the time, not just when you set the system.)

If you find a detector that does not work, call your installer.

To use the Walk Test menu:

1. Make sure the display shows

the standby screen.





2. Press .





3. Key in your access code (or

present a tag).





1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 89 90

Comentários a estes Manuais

Sem comentários

Cooper Security i-on16 Guia de Instalação Página 57

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security i-on16