Cooper Security 9751 Guia do Utilizador descarregar pdf (Página 11)

1. Introduction

497096, issue 3 Page 5

Adding and Deleting Tags

You can use any industry-standard ISO tag or card with the 934 module. To

purchase tags from Cooper Security, quote part number Proxtagpk5.

A tag acts as an alternative to a user access code. You can assign a user a

tag, an access code, or both. You cannot assign a tag to the Master User

(User 01), the Installer (User 00) or, if the Guard Code facility has been

enabled using Command 181, the Guard (User 50). This means you can

assign up to 48 (or 49) tags on a system, one each for Users 2 to 49 (or 50).

When presenting a proximity tag to a 9930 keypad, whether for programming

or for normal use, make sure that the tag is touching the front of the keypad to

the left of the display as shown in Figure 1. The 9940 keypad has a proximity

coil that makes the whole case sensitive to tags.

Figure 1. Sensitive Area on 9930 Keypad for Tag

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 95 96

Sem comentários

Cooper Security 9751 Guia do Utilizador Página 11