Cooper Security 9751 Manual de Instalação descarregar pdf (Página 122)

4. Programming

Page 114 496964

185: Keyswitch Auto Reset

This Command instructs the control unit to reset a tripped keyswitch zone

automatically if the user uses the keyswitch to set the system on leaving.

Option

0 Off. User must reset tripped zones manually.

1 On. System resets a tripped zone of type KM or KF automatically

when the user sets the system with the keyswitch.

186: Set Home Beep Calls

This Command sets the number of times that the control unit will call if

Reporting Type is set to Home "beep" (Command 103, option 6). The

repeated message acts as a confirmation.

Enter two digits, from 01 to 15 (default 02). The default is usually sufficient,

providing one call to alert the user and a second call to confirm the alert. For

the 9851 only, the user can acknowledge the call by pressing "5" on the

telephone handset; this terminates the series of home "beep" calls.

Note: This Command sets the number of successful calls the system makes. It

does not include retries after failed communication attempts, which are

built into the various protocols used to control communications generally.

187 to 190: Not used

These commands are not used.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 147 148

Sem comentários

Cooper Security 9751 Manual de Instalação Página 122