Cooper Security 9751 Manual de Instalação descarregar pdf (Página 14)

1. Introduction

Page 6 496964

Keypad

Figure 2. 9930 Keypad

The 9930 keypad has a 16-character Liquid Crystal Display (LCD) that shows

"first to alarm" information, level status and programming commands. In

addition, there are three LEDs that have the following functions:

a Glows steadily when mains power is present. Flashes when the

system is working from battery backup.

f Glows steadily when the system is unset if a telephone line fault is

present.

s Glows steadily when the system is unset if:

a) A fault or tamper circuit is active.

b) The system needs an engineer or remote reset.

c) A telephone line fault is present.

The 9930 keypad provides the following keys:

9 Used to start a Walk Test of the detectors.

8 Used to start a test of the Bell and Strobe outputs.

7 Used to enable or disable the Chime facility.

6 Used to set the internal clock calendar, which provides a time stamp

on printed log entries.

5 Used to display the log (250 events).

4 Used to change the User access codes.

0 Used to call an ARC to request a download.

Y Used to enter programming and setting/unsetting commands.

X Used to set the system with individual zones (including 24-hour

zones) temporarily omitted.

ABCD Used to set levels or partitions.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 147 148

Sem comentários

Cooper Security 9751 Manual de Instalação Página 14