Cooper Security i-on160EX Guia de Instalação descarregar pdf (Página 119)

i-on160 Step by Step Programming Procedures

Page 113

6. Press Y.

The display shows a message asking you to

confirm your choice. (Press X if you want to

change your mind.)

Delete ALL detectors

and zone data?

6. Press Y.

The display shows a second message asking you

to confirm your choice. (Press X if you want to

change your mind.)

Note: The deletion will take place immediately, and

not when you leave Installer Mode.

Are you sure?

7. Press Y to confirm your choice.

After a short message confirming that the

control unit has deleted all the radio detectors

the display returns to the Delete All menu.

ADD/DEL DETECTORS

Delete All >

To reinstate the detectors you must teach the control unit each detector's

identity again (see page 110).

Changing Zone Names, Type, Attributes and Partitions

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press Y.

DETECTORS/DEVICES

Detectors

3. Press Y .

DETECTORS

Add/Del Detectors

4. Press n until the display shows:

DETECTORS

Program zones

5. Press Y .

The bottom line of the display shows the first

zone.

Z001 P0<00<00 NU

Zone 000 >

6. Press u or n to show the other zones.

Z002 P0<00<02 NU

Zone 002 >

(Hint: You can key in the zone number you wish

to edit, for example:“012” for zone 12.)

The top line of the display shows the zone

number, the detector connection point and the

current zone type (NU = Not Used).

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 179 180

Comentários a estes Manuais

Sem comentários

Cooper Security i-on160EX Guia de Instalação Página 119

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security i-on160EX