Cooper Security i-on160EX Guia de Instalação descarregar pdf (Página 78)

Installer Menu Options i-on160

Page 72

No Alert Tones

The keypad gives no alert tone. (The red LEDs around the navigation key

glow to show that there is an alert.)

Mains Fail Delay

This option controls the length of time that the control unit waits until starting

an alert if the mains supply fails. The values available are 0 to 10 minutes.

Note that when the value is set to 0 minutes, mains interruptions of less than

9 seconds will not start an alert.

Battery 2

This option can enable or disable alert reporting on the second backup battery.

The options are:

Enabled

The control unit will start an alert if battery 2 is missing or low voltage.

Disabled

The control unit will ignore the presence or absence of battery 2.

Communications

Note: If you have connected a plug-by communicator then use the Outputs -

Plug-by Outputs menu to program the communicator.

The Communications option in the Installer Menu contains all the options

needed to program how the control unit will communicate alarms. Within the

Communications option, the main menu items deal with the following areas:

ARC Reporting

Deals with reporting to a central station using either SIA, CID or Fast

Format.

Speech Dialler

Deals with recording speech messages, selecting the alarm types that will

trigger them, and selecting destinations for the messages. This sub-menu

is visible only when the i-sd02 or i-gsm-2 modules are fitted.

SMS

Deals with setting up text messages, selecting the alarm types that will

trigger them an selecting their destinations. This sub-menu is visible only

when the i-sd02 or i-gsm-2 modules are fitted.

Line Fail Reporting

Allows you to select how the control unit reports a communications failure.

IP Network (Own)

The Web Server sub-menu deals with setting the control unit’s own IP

address and access to the built in web-pages.

The other sub-menus within IP Network (Own) menu allow you to set up

the IP address and other parameters for any attached Ethernet or GPRS

modules. These sub-menus will not appear if the modules are not fitted.

Downloading

Deals with setting up phone numbers, account numbers for the

downloader, and controlling the type of connection you wish to allow.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 179 180

Comentários a estes Manuais

Sem comentários

Cooper Security i-on160EX Guia de Instalação Página 78

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security i-on160EX