Cooper Security i-on160EX Guia de Instalação descarregar pdf (Página 137)

i-on160 Step by Step Programming Procedures

Page 131

13. EITHER:

Press Y to carry on and program the output

name (see step 10 on page 132 )

OR:

Press X to carry on with other programming.

DON’T FORGET to leave the Installer Menu in

order to save the changes you have made (see

page 7 ).

Giving a Radio Output a Type:

Note: Some output types can be assigned to zones or partitions. If you select

those types then the keypad display will show a further menu allowing

you to select the appropriate zones or partitions.

To give a radio output a type:

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press n until the display shows:

INSTALLER MENU

Outputs >

3. Press Y.

OUTPUTS

Radio Outputs >

4. Press Y.

RADIO OUTPUTS

Add Outputs >

5. Press n until the display shows:

RADIO OUTPUTS

Edit Outputs >

6. Press Y.

The bottom line of the display shows the first of

the available radio expanders.

EDIT OUTPUTS

Exp. R1-02 (R30)>

7. Press u or n to select the expander that you

wish allocate the radio keypad to.

Note: This example assumes that your radio

expanders are bus devices 02 and 05. The

numbers may be different on the system you

are working on.

EDIT OUTPUTS

Exp. R1-05 (R10)>

8. Press Y.

The display shows the first in a list of the radio

outputs for the selected expander. The bottom

line of the display shows the current name of

the output.

EDIT O/P R1>05>01

O/P R1>05>01

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 179 180

Comentários a estes Manuais

Sem comentários

Cooper Security i-on160EX Guia de Instalação Página 137

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper Security i-on160EX